Mini Circuits' PMA3 series MMIC amplifiers are ideal for modern, space-constrained circuits.
Mini-Circuits' HFCN series LTCC filters offer a range of frequency bands for applications such as cellular communications, Wi-Fi®, and satellite systems.
Nisshinbo Micro Devices’ RP604 buck/boost converter with an ultra-low quiescent current features a minimum supply current and high efficiency at a low load.
Mini-Circuits' ANNE coaxial terminations provide reliable space-saving solutions for applications such as test equipment and communication/radar systems.
NXP's GD3162 IGBT/SiC gate driver is designed for high-functional safety integrity level systems (ASIL C/D).
Mini-Circuits' YAT series high-performance microwave attenuators are ideal for precise signal-level controls in various RF and microwave applications.
Mini-Circuits' TCM series SMT transformers offer dependable space-saving signal transformation for wireless, broadband, and other RF system applications.
Nisshinbo Micro Devices’ NT1192 LNA features high gain and low noise figures from 1164 MHz to 1300 MHz, making it ideal for L5/L2/L6 band GNSS applications.
ebm-papst's AxiACi series axial fans are designed for the diverse requirements of refrigeration technology, industrial ventilation, and telecom applications.
STMicroelectronics' ST4E1240 is a low-power differential line transceiver for data transmission standard RS485 applications in half-duplex mode.
Reed Semiconductor's RS31340B small-size eFuse protection switch is designed for applications such as industrial systems, PCI®/PCIe®, and more.
Reed Semiconductor's RS31385 active circuit protection device has an integrated MOSFET used to limit current and voltage to safe levels during fault conditions.
Infineon Technologies 的一系列认证 BLE® 模块提供了按照 BLE 通信标准工作所需的组件。
3M’s CoaXPress industrial camera cable assemblies are ideal for high-performance applications requiring long transmission distance and high bending durability.
Nisshinbo Micro Devices’ R5449Z one-cell Li-ion battery protection IC is ideal for high-side N-channel MOSFETs and temperature monitoring.
Klein Tool’s impact-rated, heavy-duty, deep-well flip socket sets are available in various sizes with a compact and modular storage system.
NXP's PCA9452 is a single-chip power management IC (PMIC) designed to support the i.MX 93x processor family in automotive applications.
Nisshinbo Micro Devices’ NT1191 low noise amplifier features good gain flatness and low noise figure in the entire GNSS band from 1164 MHz to 1610 MHz.
AC Connectors’ L5-20P extension cord PDU is designed for temporary and emergency power requirements, making it ideal for outdoor events and construction sites.
Amphenol’s D-sub SMT connectors are interchangeable and intermateable with other makes.
Jonard Tools’ TFS-100 portable wireless thermal stripper is designed to strip the jacket off single fiber and up to 12-strand ribbon fiber cable.
Abracon's O-CS41 series OCXO is housed in a compact 41 mm x 30 mm surface mount package, ensuring compatibility with various applications.
AC Connectors’ L5-20PR locking extension cord is ideal for generators and industrial construction, ensuring flexibility and performance in extreme conditions.
Raltron’s RSP series speakers support a variety of applications with multiple form factors, mounting methods, and performance specifications.
Vishay's commercial-grade NTC SMD 0402 chip thermistors feature a small surface-mount 0402 case size.
Quectel's BG95 is a series of multi-mode LPWA modules supporting LTE Cat M1/Cat NB2/EGPRS and integrated GNSS.
Beacon EmbeddedWorks' OMAP35x System-on-Module (SoM) is a compact, product-ready hardware and software solution that fast-forwards embedded designs.
Raltron’s RMIC series microphones in ultra-small packages from 3.0 mm to 9.7 mm are available in omnidirectional, unidirectional, and noise-canceling versions.
Amphenol’s Multi-Trak™ connectors feature a 0.60 mm pitch and vertical configurations.
Reed Semiconductor's RS53317 high-power-density, fully integrated synchronous buck converter can support up to 6 A continuous output current.
MCC's 40 V and 60 V auto-grade MOSFETs offer the advantages of versatility and performance for a variety of automotive electronic system applications.
EPC's EPC9192KIT Class D amplifier evaluation board is ideal for applications including pro audio, home audio, and transportation audio.
Vishay's PA16F series knob potentiometers help reduce required clearance to a minimum.
Raltron’s RPE series piezo elements are ideal for fire and safety, smoke detectors, wearables, medical devices, GPS tracking and personal security applications.
Klein's flip socket set high-torque, 12-point design is easier to position and works with square fasteners.
MCC's 100 V and 150 V Schottky barrier rectifiers provide efficient and compact solutions for automotive and commercial applications.
Klein Tools' face shield has superior impact protection and is tested for high impact to protect against flying objects.
Maswell's 5G MIMO and Wi-Fi combo antenna series comprise the 4-channel AN.AG50.2Cell.2WiFi.40, and 6-channel AN.AG50.2Cell.4WiFi.2M and AN.AG50.4Cell.2WiFi.2M.
MLCC, Electrolytic or Mica, DigiKey offers kits for the engineer and hobbyist alike.
The Dojo Five D5MFD-nRF53-HIL kit revolutionizes modern embedded firmware systems development with Nordic Semiconductor's nRF5340.
STMicroelectronics' second-generation STM32 microprocessors enable secure computing and advanced edge AI in connected industrial applications.
ams OSRAM's OSLON® Square Horti White now comes with Photon Flux hot binning.
EVVO's DS18B20-EV digital temperature sensors with single-wire interface are capable of providing temperature readings with high accuracy.
EVVO's ULN2803A-EV Darlington transistor is a high-voltage, high-current driver IC with 8 NPN Darlington pairs.
EVVO's SN74LVC1G08 series IC gate inputs can be driven from either 3.3 V or 5 V devices.
EVVO MAX485ESA-EV IC transceivers versatile low-power integrated circuit is designed for use in serial communication applications
EVVO's LM2596 step-down voltage regulator IC has a 5 V output, commonly used in power supply applications.
Adam Tech's AC/DC converters are ideal for DC power applications, supporting a wide range of watts, voltages, and currents.
Adam Tech's DC/DC converters are ideal for applications that utilize different voltage levels, supporting a wide range of watts, voltages, and currents.
ABLIC's S-585AA series 2-wire serial EEPROM with an ARP function is supported and optimal for SSDs that communicate over the SMBus.
Analog Devices' LT8418 can be configured into synchronous half-bridge, full-bridge topologies, or buck, boost, and buck-boost topologies.
Phoenix Contact's TCP 32 VDC thermal device circuit breakers are designed for surge and overcurrent protection.
Quectel's EC21 is a series of LTE Cat 1 modules optimized specially for M2M and IoT applications that are not reliant on high-speed connectivity.
Cal-Chip Electronics' GMC series small-size MLCCs are designed for applications including SMT assembly equipment and general-purpose.
Vishay's NTCSC series commercial-grade chip thermistors deliver high sensitivity and high accuracy.
Texas Instruments' TPSF12C3 common-mode AEF IC is designed to improve the CM EMI signature for three-phase AC power systems applications.
Analog Devices 的 MAX78002 是一种 AI 微控制器,可让神经网络能够以超低功耗执行,位于物联网的边缘。
STMicroelectronics' X-STM32MP-NFC08 NFC evaluation board embeds an NFC card reader IC and includes an antenna etched on the PCB with associated tuning circuit.
AC Connectors’ reliable AC WORKS® dryer extension cord [1430PR] features lengths of 10 ft., 25 ft., and 50 ft. with a NEMA 14-30P to NEMA 14-30R configuration.
FITCO nv's PROTEC wrap FR fabric is ideal for protecting electrical wiring, cables, hoses, and insulation pipes.
STMicroelectronics' TSB952 is a high-speed dual operational amplifier featuring an extended supply voltage operating range and rail-to-rail output.
MCC's SICW028N120A4-BP 1,200 V SiC MOSFET is ideal for industrial and commercial devices in power management applications.
STMicroelectronics' X-STM32MP-GNSS1 is an STM32 MPU expansion board that features the Teseo-LIV3FL module for low-power, multiconstellation GNSS positioning.
PANJIT’s 650 V IGBT high-speed series are designed with the latest field-stop trench gate technology to achieve high efficiency, low loss, and energy savings.
PANJIT’s ESD protection devices are configured to protect sensitive equipment from ESD latch-up events.
STMicroelectronics' SR5 E1 line automotive MCU, based on Arm® Cortex®-M7 core, is designed to control the growing market of electrification applications.
Quectel's EC25 is a series of LTE Cat 4 modules optimized specially for M2M and IoT applications.
Abracon's ABM8AAIG ceramic crystals come in automotive grades 1 and 0, making them well-suited for automotive applications.
USound's Conamara MEMS speakers are available as full-range speakers and as a tweeter, following the market demand for high-performing two-way systems.
Richtek's RT6252A is a simple, easy-to-use, 2 A synchronous step-down DC-DC converter with an input supply voltage range of 4.5 V to 17 V.
Weidmuller's range of DCS marshalling terminal blocks help to provide flexible solutions for complex production processes.
STMicroelectronics' X-NUCLEO-EEICA1 expansion board is designed for use with M24256E-F and M24M01E-F series I²C EEPROMs for data reading and writing.
MCC's 60 V and 100 V Schottky barrier rectifiers offer maximum versatility and are designed for industrial and renewable energy applications.
WAGO's Green Range 221 reimagines 221 series LEVER-NUTS® splicing connectors using bio-circular material and recycled plastic for reduced use of new material.
Golledge Electronics introduces TCXOs to an established range of meticulously designed packages customized to meet specific design and end-user needs.
AC Connectors’ AC WORKS® indoor/outdoor extension cords in 10 ft, 25 ft, and 50 ft lengths feature a SJTW, 12/3 construction with a NEMA 5-15/20 configuration.
Analog Devices' TMCM-1290 is a single-axis controller and driver module with a state-of-the-art feature set for 2-phase stepper motors.
STMicroelectronics' M95P08-I is available in 8-pin DFN2X3 for integration in the small modules of personal electronics, portable medical, and IoT modules.
Stackpole Electronics' TMJ series SMT thermal jumper can reduce component temperatures in applications including power supplies, data servers, and more.
CUI Inc’s PST50W and PST75W series converters are ideal for electric vehicle (EV) charging and industrial, railway, and remote telecom applications.
ATTEND's waterproof USB Type-C® connectors achieve impressive data transfer rates of 10 Gbps and support high-speed communication and power delivery.
CODACA’s CPD1717BA series two-in-one power inductors filter out the noise from the amplified voice signals to get the purified sound for Class-D amplifiers.
KEMET 的 KO-CAP 聚合物电容器适用于 DC/DC 转换器应用,具有低 ESR 和高纹波处理能力。DigiKey 供应 KEMET 电容器。
ACES Group’s vertical MicroSD card connectors feature a push/push functionality making them a high-speed and dependable solution.
Explore Allegro’s advanced clean energy solutions for sustainable power generation and efficient green energy innovation and management.
Renesas' FemtoClock3 ideal for up to 224 Gbps SerDes rates, and with high level of integration that supports up to 4 frequency domains with low power dissipation.
Marktech Optoelectronics' UVC LEDs utilize Silanna UV chips and are designed to operate at peak wavelengths of 235 nm and 255 nm.
MCC's 600 V super-fast recovery rectifiers are ideal for reliable power management in industrial, consumer, and telecommunications applications.
MikroElektronika’s MIKROE-5995 GNSS 14 Click board™ uses Super-S technology for improved RF sensitivity and dynamic position accuracy.
Analog Devices' MAX40109 sensor AFE features analog front-end to interface with resistive bridge-based pressure sensors.
MCC's MIF400R065C2TL-BP 650 V IGBT module is ideal for motor controls, UPS, welding equipment, and other power-intensive applications.
QT Brightek's QBSLDXX30ZGR 0.30" single-digit display is available as standard and in a wide variety of colors.
MikroElektronika's MIKROE-5980 Click board™ features comprehensive diagnostics, including overcurrent protection, thermal shutdown, and undervoltage lockout.
CODACA’s CPD2320S/CPD3119SA high current power inductors are designed for digital amplifiers to solve the problems of heating, noise, and poor sound quality.
Analog Device's ADES1754, ADES1755, and ADES1756 systems can shut themselves down during a thermal overload by measuring their own die temperature.
ADI's ADR1001 helps reduce the overall solution area by simplifying the design process by eliminating the challenges of building a discrete circuit solution.