设置
快速交货
免运费
国际贸易术语
支付类型
市场产品
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Slide 38
Slide 39
Slide 40
Slide 41
Slide 42
Slide 43
Slide 44
Slide 45
Slide 46
Slide 47
Product List
In the SPORT domain just a couple of tips, one is if you’re operating in multi-channel mode, and you happen to be in a mode where you’re mastering the clocks and the frame syncs, don’t connect your transmit frame sync to your receive frame sync because in this mode, the transmit frame sync actually is framing the active TX data and it’s like the transmit data valid pin. This is a very common mistake to watch out for. Also, make sure you use proper termination for your clock and frame sync signals. This is dependent on the speeds you’re operating at, board layout and things of that nature.
PTM Published on: 2006-08-24
