设置
快速交货
免运费
国际贸易术语
支付类型
市场产品
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Product List
Mount the resistor using M4 x 12 mm screws for the mechanical mounting holes and M4 x 6 mm screws for the electrical interface terminals, with a contact or spring washer for each screw. First mount the resistor mechanically using the M4 x 12 mm screws, tightening each screw by hand until the screw head touches the contact or spring washer. Then apply a nominal tightening torque of 1.8 ±0.2 N-m to fastened the mechanical mounting screws. Next, use the M4 x 6 mm screws and washers to connect to the electrical interface terminals by hand tightening until each screw head touches each washer, then apply 1.3 ± 0.2 N-m to fastened the screws.
PTM Published on: 2023-01-20
