Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Product List
MagnePot Non-Contacting Rotary Position Sensor Slide 9

MagnePot sensors are very easy to interface with control systems and circuit requirements are minimal. A 4.7 nF capacitor is recommended (but not essential) for optimal EMI performance. Pull up or pull down resistors can be used if desired. Pull up/down resistances should be 10 kΩ minimum. An optional RC filter shown here as R1 and C1 can be used if desired.

PTM Published on: 2013-05-14