设置
快速交货
免运费
国际贸易术语
支付类型
市场产品
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Product List
Often times a cable assembly will only have a connector on one end. This is often done so that one end can be soldered directly into the product. In these cases cables are most often terminated by stripping away the wire’s insulation, and then coating the exposed copper wire with a layer of tin. The tin prevents the wire’s strands from fraying apart or corroding and allows for easy soldering. Sometimes the wire is ended with a clean, or blunt, cut. This is typically done when more control of the stripping and tinning process is wanted.
PTM Published on: 2013-02-01
