设置
快速交货
免运费
国际贸易术语
支付类型
市场产品
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Product List
The IEC 711 coupler is the most common one used to measure Balanced Armature driver frequency response. It provides a reasonable simulation of the ear’s response to about 8-10 kHz. Above that the coupler’s resonant frequency of about 13.5 kHz causes too much inaccuracy to be reliable. The presence of signal beyond 8 kHz can be seen, but not its level with any accuracy. A single coupler can be used to compare different drivers at higher frequencies by showing relative responses.
PTM Published on: 2015-02-20
