PTM Library

PCM materials can be used for some of the most demanding of thermal applications.

The H48-2 series of thermally conductive gap fillers covers the thermal conductivity range from 1.8-6 W/m.k and is available for a variety of applications.

TG-LH-FBPE-80 is a compound that can be used to increase lifetime, value and reduce operating costs for electronic devices.

TG-NSP35 is perfect for circuit boards where there are multiple component heights that need to be connected to a heat-sink.

Designed for applications where an ultra-soft material is needed due to tolerance issues or delicate components.

The H48-6A high performance silicone gap filler is specifically designed for military applications.

L37-3L is designed for applications where silicone sensitive electronics are present.

PC93 and PC94 series of non-silicone based thermal interface products are available with light PSA on one or two sides and are RoHS and Reach compliant.

An overview of the LI98 series of thermally conductive adhesive tapes are especially designed for thermal management in the LED and lighting industry.

The FAM product range is specifically designed for managing heat and EMI issues in set-top boxes.

T-Global range of phase change materials (PCMs) designed specifically for cooling of electric vehicle batteries.

One-part, fully cured, non-silicone thermal putty with a thermal conductivity of 2.5 W/mk, and address common thermal issues in automotive applications.

This module will introduce the XLi98 range of thermal heat spreaders designed primarily for TV and display applications.

The use of superior electrical insulation ensures maximum protection against electrical breakdown and reduces thermal resistance, improving performance.

Provide superior electrical insulation which ensures maximum protection against electrical breakdown and reduces total thermal resistance.

A low ownership cost solution meeting thermal challenges. Useful in applications where space restrictions preclude the use of conventional heat sinks.

Silicone based thermal interface products supplied on log-rolls in widths of 50 m long and 320 mm wide and various thicknesses dependent on application.

TG4040-D thermal putty is one-part, fully cured, dispensable, and will not undergo measureable changes when exposed to thermal cycling or ageing tests.

T-Global T68 product range of highly orientated, pyrolytic graphite thermal interface materials are available in standard sheets and custom-die cuts.

Designed for LED applications, the products offer efficient management of the LED junction temp which is essential for LED lifetime and consistent color output.