This application note discusses various mounting solutions for Surface Mount Power Device (SMPD) packages.

This application note describes the design and performance of a 60 W auxiliary power supply with wide input voltage for industrial applications.

In this application note, we review a selection of common and emerging topologies for MV drives, followed by a study of the structure and features of PP-IGBT.

This paper discusses the optimization of freewheeling device implementation for SiC MOSFETs in a half-bridge configuration.

This application note provides general guidelines for designing an off-line LED driver using the MXHV9910.

The device uses external components to satisfy design switching requirements, which enables the designer to choose from a great number of MOSFETs.

Variable speed controllers regulate the speed and/ or torque of asynchronous motors.

Line Polarity Reversal indicatesto the Customer Premise Equipment (CPE) that an incoming message is about to follow and the CPE should be ready to decode the calling line information.

The I2C bus is a set of hardware and software rules that allows communication between multiple devices over a shared, two-wire interface.

The CPC1580 is an excellent choice for remote switching of DC and low frequency loads where isolated power is unavailable.

The ITC series integrates the major components found in a typical Data Access Arrangement (DAA), in a 16 lead SOIC package

This application note describes isolation amplifier design principles for the LOC Series linear optocoupler devices

Industrial controllers and data acquisition equipment frequently require an isolated voltage-to-current loop converter in environments where high common mode noise exist and protection of equipment and personnel from high voltages are required

IXYS Integrated Circuits Division's IX9907 Application Note

Capacitor Charge/Discharge Circuits, Utilizing High Voltage IGBTs and ZCS Resonant Mode Techniques

This technical note describes the patented technology utilized to achieve and optimize the electrical, thermal and mechanical performance of the DE-SERIES devices.

Modern Power Electronics makes generous use of MOSFETs and IGBTs in most applications and, if the present trend is any indication, the future will see more and more applications making use of MOSFETs and IGBTs.

This application note includes a collection of DAA circuits that use IXYS Integrated Circuits Division OptoMOS components. It also includes a primer on DAA circuit fundamentals and listings of OptoMOS DAA design resources.

Two of the important functions provided by LITELINK to the host systems are high-voltage isolation between the host system and the public switched telephone network (PSTN), and coupling signals to and from the PSTN.

Metal Oxide Semiconductor (MOS) devices have gained broad acceptance in telecommunications. This includes use of n-channel (NMOS) transistors, p-channel (PMOS) transistors, or both (complementary or CMOS) transistors.