This application note from Zilog aims to provide a straightforward method for combining assembly routines and C language routines into one project in ZDS II, and discusses how ZDS II allocates arguments into the stack for parameter passing and where return values are stored.

This application note from Zilog provides a blueprint for ZNEO Z16F Series MCU power management.

This application note demonstrates the implementation of an interrupt-driven UART, an on-chip peripheral block featured in Zilog’s Z8 Encore! XP and Z8 Encore! MC families of microcontrollers.

This application note demonstrates how to interface a serial organic light emitting diode (OLED) display module with the UART peripheral block on Zilog’s Z8 Encore! XP Series of MCUs.

This application note describes a boot loader program for the on-chip memory functions of Zilog’s Z8F082A and Z8F1680 Series of Microcontrollers, which are based on the Z8 Encore! XP® architecture.

This application note presents a concept for a simple, low-cost nickel-metal hydride (NiMH) battery charger using the Zilog’s 20-pin Z8 Encore!® F0830 series microcontroller

This application note describes how to manage power on electrical appliances with Zilog’s ZMOTION™ Detection Module featuring advanced passive infrared technology.

This Application Note demonstrates the working of the Simple Network Management Protocol (SNMP v1) in Zilog’s TCP/IP software suite (ZTP) implemented for the eZ80AcclaimPlus!™ product line of microcontroller units (MCU) and microprocessor units (MPU).

This application note discusses programmable speed control of a Universal Motor using Zilog’s Z8 Encore! XP® 8-pin microcontroller unit (MCU).

This application note from Zilog discusses the closed loop control of a 3-phase brushless direct current (BLDC) motor using the Z8 Encore! MC™ family of Microcontrollers (MCUs).

This application note from Zilog discusses the use of a typical 8-wire or 6-wire stepper motor, in the unipolar mode of operation, with a Z8 Encore!® microcontroller.

This Application Note demonstrates Zilog’s Z8 Encore!®-based battery charger that charges various rechargeable batteries in a fast, efficient, and safe manner.

This application note from Zilog describes Z8 Encore! XP®-based Sealed Lead Acid (SLA) battery charger.

This application note from Zilog demonstrates a reference design for driving High Brightness LED (HBLED) with Z8 Encore! XP® F1680 Series MCU (Z8F2480AN020SG) and IXYS MXHV9910 Off-line HBLED driver.

AJAX web page control and monitoring via the internet using the Zilog® eZ80AcclaimPlus! embedded web server.

This application note from Zilog describes the use of Z8 Encore! XP® based Uninterruptible Power Supply (UPS) Battery Charger.

An Internet-enabled product built around the eZ80AcclaimPlus!™ microcontrollers/microprocessors using the Zilog TCP/IP stack (ZTP) involves developing web pages to control the product’s functionality.

This Application Note describes Zilog’s Z8 Encore! XP®-based Nickel Cadmium (NiCd) battery charger.

This application note from Zilog describes a low-cost speed controller for a single phase, permanent split capacitor AC motor (a convection fan motor).

This reference design from Zilog describes the implementation of motor control for a 350W hand-held electric drilling machine along with Nickel Cadmium (NiCd) battery charging in a single unit.