Würth Elektronik discusses the importance of selectin the appropriate input capacitor for capacitive power supplies.
This is Amphenol SV Microwave's application note on the VVITA Installation/Removal Tools
Carlo Gavazzi's EM511 can continuously analyze any phase, providing accurate data of voltage, current, power, and other single phase and system variables.
Carlo Gavazzi's EM511 provides real-time monitoring of electric variables including energy and power.
Detailed description of operation of the SD210/5000 series of high-speed analog switches and switch arrays. It contains an explanation of the important switch characteristics, application examples, test data, and other application hints.
Though not as well known as the bipolar transistor or op amp, this long-established transistor excels where optimized circuit behavior is needed such as ultra-low noise.
In sensor signal conditioning circuit designs, the design engineer must protect the input section from overcurrent and overvoltage conditions.
The behavior of smartphone and tablet users has changed dramatically over the past two years. People are constantly sending emails, texting, posting on social networks and playing online games.
The aim of this application note is to show the developer how a proprietary contactless power transmission system rated at several hundred Watts, including data transmission, can be created simply and efficiently.
The purpose of this document is to explain the methodology on how to change wireless power charging coils manufactured by Würth Elektronik eiSos on a Demo Circuit incorporating receiver control chip LTC4120 manufactured by Linear Technology.
In order to turn the module on or off, an external switch (signal NPN or N-Channel FET) is typically used to interface with the On/Off pin.
The Hornet series of voltage regulators has been developed for easy selection, design and proven performance and reliability
There are two Naos Raptor series evaluation boards. One board has a dual layout of the NSR003/006/010 and the NSR020 modules; the second has a dual layout of the NSR040/050 and the NSR060 modules.
DC Metering in Electric Vehicle Fast Chargers, Carlo Gavazzi, DigiKey
Learn the main characteristics of power based inductor iron formulations, including the susceptibility to oxidation.
The trimmer can be used as a rheostat, in the volume control to alter the current going through the microphone and the amplifier.
This application note explores the basics of this increasingly important category of semiconductor technologies and devices and features NI hardware and software solutions that help MEMS manufacturers test and measure these devices efficiently and confidently.
This application note is focused on battery module and pack level testing using examples of real-world industry applications.
This application note focuses specifically on test considerations around high-power PAs and how the steps taken in validation of these devices can be different from PAs that operate at lower power levels.
This application note is created with the assumption that the reader is familiar with WLAN PHY-layer testing and is based on the use of a vector signal transceiver (VST) for stimulation and measurement of an RF front-end device.