PTM Library

Intel® Enpirion® output voltage ripple measurement techniques keep the VOUT to GND measurement loop as small as possible.

ROHM's voltage detectors use half the power of conventional products, provide high resolution, and are available in many package types.

This presentation will introduce the features, applications, and usages of the Touch Sensor Module, based on the Neonode patented zForce® optical reflective platform.

This presentation will introduce Renesas' RA4W1 MCU Bluetooth® low-energy 5.0 solution.

This presentation will introduce Harwin's line of Datamate Mix-Tek housings.

This presentation will discussed basic electric parameters, features, construction, applications and benefits of the TNPW0201 thin film chip resistor.

Detailing the features and capabilities of the DGH series supercapacitor, as well as differences between the DGH series and conventional electrolytic capacitors.

This presentation will introduce the ebm-papst brushed and brushless DC drive system range.

This presentation will introduce the different version of Wi-Fi, discuss the features of the PAN9420, describe its software command set, the Wifigurator command and configuration application and other keys aspects concerning this module.

This presentation will provide an introduction to the P4SP series of connectors from Panasonic.

Signal’s lighting transformers (LT) series are used for low voltage level lighting systems in close proximity to lamps or loads.

Flex Power Modules specializes in designing and manufacturing DC/DC power modules for the datacom, telecom, industrial, medical, and transportation markets.

This presentation will cover the features, applications, and the Ferroelectric RAM products, also known as F E RAM, available from Rohm Semiconductor.

ROHM's automotive LDO regulators provide simplified circuit design and require fewer and smaller external components.

An introduction to ROHM's isolated and non-isolated gate drivers and the various categories available.

This presentation will explain the pulse performance advantage of Power Metal Strip as compared to other current sense technologies.

This presentation will introduce the key features, ratings, characteristics, models and series comparisons to the TEN 40E and TEN 40WIE family of products.

This presentation will provide a brief overview of ROHM’s PMIC offerings, explain benefits, and show how the products work with NXP Applications processors.

This presentation will provide an overview of the benefits of optical transceiver solutions from Formerica.

This presentation will go through the compact fingerprint biometric module, the BM-Lite which is a plug-and-play complete biometric module for applications and devices for access control.

This presentation will provide an overview of ROHM Semiconductor's contactless current sensor.

This presentation will introduce the types, applications, technology, and advantages of Aspherical Glass Lenses.

This presentation will introduce Panasonic's PAN9026 Wi-Fi dual band module, with Bluetooth® features.

This presentation will discuss the features, applications, and what a flex circuit assembly is.

How to define the life of a fan and ways to extend fan life within an application.

RECOM Power offers low to medium power AC/DC and DC/DC medical grade DC/DC and AC/DC converters to cover a broad range of applications.

Amphenol Telaire provides a wide range of single channel and dual channel non-dispersive infrared (NDIR) CO2 sensor solutions.

From miniature to standard size switches, logic level PC mount to 25A power rated, PC Mount and panel mount, Copal Electronics has a slide switch to meet your needs.

CDE’s PPC flat aluminum polymer capacitors offer a package thickness of just 1 mm and are for applications requiring high-ripple current and the thinnest possible profile.

Lower impedance/ESR at high frequencies, constant capacitance over a wide frequency range, and noise absorption allow MLCCs to save costs and perform better.

Overview to understand the differences between a discrete design, linear regulator and modular switching voltage regulator

This presentation will intrdocut the LPC551x/S1x microcontroller family.

Designed with user satisfaction in mind, it includes user friendly options like fully ratcheting crimp cycle with built-in safety release and double plated jaw.

From miniature to standard size switches, Copal Electronics has a wide variety of pushbutton switches to choose from.

This presentation provides both an introduction to Signal’s line of High Current Toroidal Choke, known as the HCTC series and an overview of where and how the HCTC series chokes are used.

An overview of RECOM's low to medium power medical grade AC/DC and DC/DC converters.

This presentation will highlight the features, benefits, and ideal applications for this series of mini slide pots.

This presentation will provide an overview of the EPC-2701 Zebra Arm®-based Embedded Computer from VersaLogic.

The Intel® Enpirion® triple channel EZ6301QI and EZ6303QI PowerSoCs integrate the inductor, digital controller, and power MOSFETs on one channel.

This presentation will introduce Vishay Dale's Power Metal Plate™ WFM series resistors.

Würth Elektronik's WE-HCF and WE-HCFT power inductor family is specially designed for non-isolated switched-mode power supply topologies.

Signal Transformer's SMD inductor design kits provide a varied selection of SMD and toroidal inductors to support DC/DC converter processing equipment.

This presentation will go over Impel Cable Assemblies designed for use with Open19 infrastructure. It will also discuss challenges facing edge computing data centers and the solutions this product offers.

TRACO Power's TMDC 06 and TMCD 10 series of DC/DC converters are designed to support rugged industrial environments and perform in extreme temperatures.

Vishay Dale's Power Metal Strip® WSHP2818 and WSHM2818 resistors are all-metal welded construction that offers AEC-Q200 qualified automotive grade performance.

NXP's i.MX 8M Nano applications processor brings scalable, secure and cost-effective quad-core processing to edge IoT devices.

This module will review the use of heat sinks, including how a heat sink works, the factors that impact heat sink thermal performance, common heat sink materials, and thermal interface materials.

This presentation will focus mostly on implementation details, the development environment with the Efinity tools and their development kits, along with implementation examples.

This module explores the defining features, capabilities and architecture of Zynq-7000 SoCs, and will cover typical applications and development tools available.

Littelfuse's surge protection devices protect equipment from transient overvoltage and are offered in multiple pole versions for all types of distribution systems.

This presentation will give a brief summary of the Trion FPGA family and the functional blocks available in the Trion family.

NorComp's VULCON™ connectors offer a waterproof cable-to-panel interface for demanding end use applications.

This presentation will discuss the features, technology, and products for the Trion FPGA family.

This presentation will give an overview of Laird Thermal Systems' Thermoelectric Cooler Assemblies and Temperature Controller product lines.

Vishay's VOR112x hybrid solid state relay allows fast switching times with a wide operating ambient temperature range.

This PTM defines what a Thermal Dielectric Pad is, what are the major product selection criteria, and a ranking based on the level of performance.

KEMET's pyroelectric infrared sensors are able to detect the natural infrared signature produced by humans without using lenses.

This presentation will introduce TT Electronics' OP207CL low-profile, infrared emitter from the Optek Technology brand.

This presentation will discuss the features, applications, and the open loop ASIC of LEM’s HOYS and HOYL open-loop current transducer families.

ROHM's supervisor IC chip is designed for the automotive market where AEC-Q100 and ASIL qualifications are required.

This module will review the key features, ratings, characteristics and enhancements of four series of 1 and 2 W unregulated SIP products.

LEM's ASIC with on-board second-order Sigma-Delta modulator provides a digital output to open-loop transducers.

KEMET offers an extended portfolio of common mode, differential mode, and dual mode chokes, as well as input and output capacitors for power supplies.

This presentation will explain what separates industrial-grade DRAM modules from commercial-grade modules.

Schaffner's FN9255 and FN9255E IEC inlet filters offer high attenuation, front and rear mount options, and seven current ratings.

ECS's AEC-Q200 qualified products are ideal for automotive, industrial, medical, and municipality applications.

Introduction of the Littelfuse thin film platinum resistance temperature detectors

This tutorial will provide a basic overview of safety certified capacitors offered by KEMET, as well as testing requirements and general application information.

An introduction to Amphenol RF's 2.2-5 series of RF connectors, a well as their features, applications, and specifications.

This presentation will introduce LEM's LDSR leakage current measurement for safety.

This presentation will explain how to test a thermal interface material from Parker Chomerics.

This presentation will define what Thermal Gap Pads are, what the major product performance criteria used to make the material selection are, and rank the performance of each.

TRINAMIC's TMC2300 low voltage stepper motor driver combines StealthChop2™ and StallGuard4™ to create a ground-breaking solution for portable devices.

RECOM's DC/DC gate driver converters offer asymmetric dual outputs ideal for IGBT drivers in many applications.

This presentation will cover information pertaining to this DC-DC converter, explaining the function, features and line up of what is currently available from the company.

An introduction to Amphenol Industrial Operations' SurLok Plus™ compression lug system.

Littelfuse offers a broad array of solutions for AC and DC types of electric vehicle charging stations.

NXP's eiQ™ machine learning software environment enables customers to convert and optimize trained machine learning models for deployment on NXP silicon.

This presentation will introduce the base technology and features of Susumu’s high-frequency attenuators, the ATS series.

This presentation will introduce the range of mini-breakers, explain their construction, and review their applications and advantages. It will also explain the part numbering system and talk about how to select the most suitable part.

This presentation will provide an introduction to Analog Devices LTC33xx family of synchronous buck regulators.

The objective of the training is to discuss where data access ports can be used, where they are located and the features and benefits of the Panduit Data Access Ports

Low Dropout Regulators are commonly found and used in power management ICs for any demanding voltage regulation applications.

The TBU® HSP is a silicon-based, solid-state, resettable device which is placed in a series with a signal path.

This presentation will introduce the features and benefits, part number structure and application examples for the FN3287/FN3288 series.

This presentation will provide users with the features, applications, the product line-up, and a comparison between the standard lens and the Low Profile Lens for PIR sensors.

This presentation will provide an overview of the Thermoelectric Cooler and the Thermal Wizard tool from Laird Thermal Systems.

This presentation will introduce the Electronically Commutated (EC) fans from Orion Fans.

This presentation will review the challenges in reaching the performance needed for a good industrial network and show an existing solution that can be implemented with very little effort.

This presentation will provide an overview of the available tools and products associated with the IntraVUE® solution from Panduit.

This presentation will introduce Vicor's PI31xx series of ZVS isolated DC/DC converters.

Overview of Molex's easy-on FD19 series FFC and FPC connectors.

This presentation will discuss how to maintain impedance in split core ferrites for Low-Frequency applications.

This presentation will provide an overview of the dev kit, which is a two-mic far field voice interface solution optimised for smart TVs, set-top box and smart home devices. It will introduce the key features and benefits and provide a guide on how to get started.

This presentation will introduce Molex's OptoConnect LGX and 144-Port Enclosures.

This presentation will introduce ROHM's low IQ DC/DC converters for wearables and battery powered devices.

This presentation provides information about printing solutions for industrial users.

An overview of the flux-cored solder wire products available from Kester Solder.

A tutorial on how to utilize features and benefits of the WX series soldering stations.

The presentation will introduce engineers, designers and customers to MEAN WELL’s XLG LED driver family features and why they are a suitable power solution for LED lighting applications.